sábado, 5 de noviembre de 2011

Week #1: [ˌhæləʊˈiːn]



Instructions and materials

Materials
- White polish
- Black nail marker -water washable-
- Top coat


Instructions

Small spider web

First I applied two coats of white polish and let them dry completely. when they were ready I used the nail marker and drew three lines from a single starting point (see image 2), then I joined the three lines using curve lines -like little Cs- as it can be seen on image 3, and repeat this step a couple of times so you can get what you can see on image 4.
Finally you MUST (Yes! You MUST) apply two to four coats of a clear top coat so the design won't erase.
fgvhjk


The Big Spider

Apply two coats of white polish and let them dry completely. After that draw a big oval a little bit below the center of the nail (image 1). Then, draw a small second oval just over the previous one (image 2) and add a little "C" above it (image 3).
Draw two large "C's" from the big oval to the end of the nail as you can see on image 4, and then repeat this step from the big oval to de begining of the nail (image 5)
Finally, repeat steps 2 to 5 on the other side of the pider (image 6) and then apply two to four coats of clear top coat.



Big Spider Web

First apply two coats of white polish and let them dry.
After that, draw two straight lines crossing your nail (image 1) and then two vertical lines crossing the previous lines you drew (image 2), you will get your nail divided in eight little triangles. Now join each side of the triangles by using curve lines as in the image 3, and repeat this step until you get what you can see on image 4. Apply two to four coats of clear top coat.


No hay comentarios:

Publicar un comentario